Setting up Manual Auto-Tracking

This article explains steps involved in setting up manual auto-track schedule in allGeo

CSM avatar
Written by CSM
Updated over a week ago

Setting up Manual Auto-tracking 

Manual auto-tracking can be useful for on-off  or a more temporary automatic tracking.   Here is how to setup manual auto-track schedule:  

  1. From the 'Team' page select device(s) you want to auto track

  2. Click the AutoTracking Icon  (as seen in the screen below)

  3. This will open a scheduler window, where you can specify the frequency and duration.

Setting Up Tracking Schedules & Frequencies:

  1. You can select pre-canned frequencies (30 min, 1 hr, 2hr or 4hrs) or select 'Enter the value' and input (in minutes) the frequency that you'd like

  2. Select Auto Start if you'd like this schedule to start automatically

  3. Enter the 'from' and 'to' duration for this tracking schedule to kick off and you are done

Permanent Scheduled tracking:

allGeo can be scheduled to track devices (all or a group) on a more permanent & recurring basis using the 'Master Schedule'

Did this answer your question?